The Chery Omoda 5 and Tiggo 7 Pro have carved out a solid niche in the compact crossover segment, offering a blend of sharp styling, generous standard tech, and competitive pricing. However, to truly elevate daily usability, protect your investment, and add a layer of personalization, a few well-chosen accessories make a significant difference. This guide focuses on practical, high-impact additions—from all-weather protection to charging solutions—that address the most common owner pain points without voiding your warranty.

1. All-Weather Floor Mats & Cargo Liner

The factory carpet mats in the Chery are fine for showroom duty, but they absorb mud, salt, and spills quickly. A custom-fit set of thermoplastic polyurethane (TPU) or rubber mats is the first purchase I recommend. For the Omoda 5, the front and rear sets clip perfectly into the existing retention pins, covering the transmission tunnel and heel pad areas. The key benefit here is the raised lip—it contains up to 500 ml of liquid without leaking onto the factory carpet. In the Tiggo 7 Pro, the cargo area liner is equally critical, as the load floor sits high. A non-slip liner with a 40 mm raised edge protects the rear trim panels when sliding heavier items. Expect to pay between $45 and $80 for a complete set, and always verify the model year—the 2024 facelift has slightly different rear seat contours.

2. Wireless Charging Pad Upgrade (15W)

While the Chery's infotainment system supports Apple CarPlay and Android Auto, the base trims often ship with only a 10W USB-A port. That charges a modern smartphone painfully slowly. A dedicated 15W wireless charging pad that sits flush in the front console storage tray solves this. Look for a unit with a built-in cooling fan, as the Omoda 5's console area tends to trap heat. The installation is plug-and-play via the 12V socket. The crucial data point: a 15W pad will replenish a 5,000 mAh battery from 20% to 80% in approximately 55 minutes, versus nearly two hours on the stock USB port. Ensure the pad has a non-slip silicone surface and an auto shut-off for overheat protection—this is a safety feature, not a luxury.

3. Retractable Trunk Cover (Omoda 5)

The Omoda 5's sloping roofline looks sleek, but it compromises rear cargo visibility. A retractable tonneau cover is a factory-optional accessory that many dealers forget to mention. This is not just about privacy—it reduces sun glare on rear window glass and keeps valuables out of sight. The aftermarket versions that match the OEM fitting points are 20% cheaper than the dealer part (typically $85 vs $110) and use a spring-loaded mechanism that retracts smoothly. One caveat: if you plan to carry a full-size spare tire or tall items regularly, consider a hard-shell version that can be removed in under 30 seconds without tools.

4. Front & Rear Dash Cam (Dual-Channel, 4K)

Given the rising cost of collision repairs, a hardwired dash cam is non-negotiable. The Chery's rearview mirror housing provides a clean power source via an OBD-II adapter, avoiding messy cigarette-lighter cables. For the Tiggo 7 Pro, I recommend a dual-channel unit with a 4K front sensor (Sony IMX415) and 1080p rear camera. The key metric is the field of view—front should be at least 150 degrees to capture both lane edges. Parking mode is essential: the camera should draw less than 5 mA in standby to avoid draining the 12V battery overnight. Brands like VIOFO and Thinkware offer hardwire kits with voltage cutoff (set to 12.4V) to protect the battery. Total cost with professional installation runs $200–$300, but it often lowers your insurance premium by 5–8%.

5. Paint Protection Film (PPF) on Front Bumper & Hood

The Chery's vibrant paint colors—especially the "Turbo Green" and "Aqua Blue"—are stunning, but the clear coat is thin. A professional-grade PPF application on the front bumper, leading edge of the hood, and side mirrors is the most effective way to prevent stone chips. The data: a 8-mil thick TPU film absorbs impacts up to 15 J (joules), which stops 90% of highway debris. While a full-front wrap costs $600–$900, a DIY precut kit for the Omoda 5 is around $120. The trade-off is installation time—it takes 4–6 hours and requires a dust-free environment. If you skip this, at least apply a ceramic coating (SiO2 content >70%) to reduce UV fading. The coating adds 2–3 years of gloss retention but does not protect against physical scratches.

6. Performance Air Filter (High-Flow, Washable)

For those who want a slight throttle response improvement, a washable cotton gauze air filter (e.g., K&N or BMC) replaces the disposable paper unit. In the Tiggo 7 Pro's 1.6L turbo engine, dyno tests show a gain of 3–5 horsepower and 7 Nm of torque at high RPM. More importantly, it reduces intake restriction, which translates to a 0.2-second faster 0–100 km/h time (from 8.8s to 8.6s). The cost is $55–$70, and it pays for itself after 3–4 OEM filter replacements. The caveat: over-oiling can contaminate the MAF sensor—use the spray lightly and let it dry for 20 minutes before installation. This is a legal modification in most regions, but check local emissions laws.

7. Wheel Locks & Valve Stem Caps

A minor but smart addition: a set of locking lug nuts (20-piece set for the 5x114.3 bolt pattern) deters wheel theft, which is a growing issue in urban areas. The Chery's factory alloys are lightweight but not cheap to replace—an OEM wheel costs $180–$250 each. Additionally, install aluminum valve stem caps with a built-in tire pressure sensor indicator (green for normal, yellow for low). These cost under $10 and provide a quick visual check without turning on the ignition.

8. Center Console Organizer Tray

The Omoda 5's center console is deep but becomes a black hole for receipts, coins, and charging cables. A 3D-printed ABS organizer tray with non-slip matting splits the space into dedicated slots for a phone, sunglasses, and a pen. It is a $12–$18 investment that reduces driver distraction—you are not rummaging for a toll card while driving. The tray is designed to sit flush without interfering with the USB ports or the shifter mechanism.

9. Cargo Net & Side Pockets

For the Tiggo 7 Pro's larger trunk, a horizontal cargo net (elastic, with four hooks) keeps grocery bags from toppling over during cornering. Pair this with two collapsible side storage bins (each 12L capacity) that fit into the wheel well recesses. This combination turns the trunk from a single open space into a segmented, organized area. The net costs $25, and the bins are $30 for a pair—far cheaper than replacing a broken glass jar of sauce on the carpet.

10. Sunshade (Custom Foldable)

Finally, a custom-fit sunshade for the windshield reduces interior cabin temperature by 15–20°C (27–36°F) when parked under direct sun. This is not just comfort—it prevents the dashboard's plastic trim from warping and extends the life of the infotainment screen's adhesive. The Chery's windshield is slightly wider than average, so a universal shade will leave gaps. A precut shade with a reflective silver layer costs $20–$35 and folds into a 5 cm disc for storage. It also protects the cabin from UV degradation of leather seats in higher trims.

Summary of priorities: If you only buy three items, choose the TPU floor mats, the dual-channel dash cam, and the PPF front kit. These three protect the vehicle's structure, electronics, and paint—the three most expensive areas to repair. The performance filter and wireless charger are nice-to-haves but do not impact resale value. All accessories listed above are reversible, meaning you can return the car to stock condition for lease return or resale without trace. For the best pricing, check the links below—most sellers offer bundle discounts for floor mats + cargo liner.

Before purchasing any accessory, cross-reference your Chery's exact trim level (e.g., Omoda 5 BX vs EX) and build date (month/year). The 2023–2024 models have different rear seat folding mechanisms, which affect cargo liner fitment. When in doubt, request a fitment photo from the seller before payment.

Shop now →