[MODULE]
Revised Description:
Protect your 2026 Leapmotor C01, C11, C10, B10, or B01 with precision-molded 3D carbon fiber door panel guards.

These hard shell covers block scuffs, mud, and scratches while adding a sleek sporty finish to your EV cabin. Designed exclusively for 2026 Leapmotor models, they install damage-free with zero sticky residue and hold securely in all weather conditions.

Upgrade your interior protection in minutes without expensive professional installation.
[/MODULE]

[MODULE]
Common Concerns:
Your Leapmotor front door panels face constant daily wear from shoe scuffs, mud, sand, pet claws, and children boots.

Factory plastic and fabric panels absorb stains and show scratches easily, making your premium EV interior look worn and neglected.

Repairing damaged door panels on modern electric vehicles is costly and time consuming, especially when the damage goes deep into the original material.

Universal stick-on pads and thin TPU films offer poor coverage, peel off in heat, leave sticky residue, and fail to protect curved areas where scuffs happen most.
[/MODULE]

[MODULE]
Our Solutions:
Our 3D molded carbon fiber anti-kick covers are scanned directly from original Leapmotor door panels for a perfect gap-free fit on every curve and edge.

The rigid ABS hard shell extends to side edges to block scuffs in areas that flat protectors miss, covering door storage pockets, speaker grilles, and window switches with precision cutouts.

Pre-applied automotive grade acrylic foam tape delivers a secure hold that will not peel in heat or rain, yet removes cleanly with zero residue when you need it gone.

The textured carbon fiber finish adds a premium sporty look with a subtle Leapmotor logo, giving your cabin a custom factory installed appearance.
[/MODULE]

[MODULE]
Key Features:
Custom 3D fit engineered exclusively for 2026 Leapmotor C01 C11 C10 B10 B01 models

Rigid impact resistant ABS hard shell construction

Textured carbon fiber finish with etched Leapmotor logo

Pre-applied automotive grade acrylic foam tape for secure installation

Damage-free removal with zero sticky residue left behind

Water resistant non-porous surface wipes clean in seconds

Precision cutouts for door storage pockets, speaker grilles, and window switches

Withstands extreme temperatures from -40 C to 80 C

10 minute DIY installation with no drilling or special tools required

Package includes 2 front door covers with pre-applied tape and installation guide
[/MODULE]

[MODULE]
Product Comparison:
| Features         | Before Use                          | After Use                          |
|------------------|-------------------------------------|------------------------------------|
| Fit              | Universal loose fit, gaps on curved door panels | Precise 1:1 2026 Leapmotor door panel fit |
| Safety           | Edges catch and scratch, poor coverage on impact zones | Full edge protection, rigid shell absorbs impact |
| Legroom Impact   | Bulky pads interfere with door function | Zero impact, flush fit preserves factory feel |
| Material         | Flimsy TPU film peels and bubbles, absorbs stains | Rigid ABS hard shell, water resistant, stain proof |
| Cleaning         | Absorbs liquid and dirt, hard to scrub clean | Wipe with damp cloth, clean in seconds |
| Anti-slip        | Peels off in heat, slides and shifts | Automotive grade tape holds firmly in all weather |
| Lid Design       | Flat pads miss curved scuff zones | 3D molded edges cover areas others miss |
[/MODULE]

[MODULE]
Usage Scenarios:
Daily commuting in urban Europe where door panels meet shoes and bags in tight parking spaces

Rainy season driving across Southeast Asia with mud and water splashing onto lower door panels

Dusty desert roads in the Middle East where fine sand scratches factory plastic surfaces

Family trips in Australia and New Zealand with kids boots and pet paws causing daily wear

Cold Nordic winters where ice and slush bring moisture and salt onto door interiors

Hot Southern European summers where adhesive failure is common with low quality protectors
[/MODULE]

[MODULE]
Why Choose Us:
Designed specifically for 2026 Leapmotor C01 C11 C10 B10 B01 with factory scanned precision

No residue removal protects your original door panels and resale value

Hard shell ABS material outperforms flimsy films and soft pads for real impact protection

Carbon fiber styling enhances your EV interior with a sporty factory matched look

10 minute DIY installation saves expensive professional labor costs

Built to perform across every climate from tropical monsoon to freezing Nordic winter

Clear compliance with carbon fiber texture description, no misleading claims about real carbon fiber
[/MODULE]

[MODULE]
FAQ:
Q1: Will these covers fit my 2026 Leapmotor C10 or B10?
Yes, they are custom molded exclusively for 2026 model year Leapmotor C01, C11, C10, B10, and B01 front doors.

Q2: Can I remove them without damaging my original door panels?
Yes, the tape peels away cleanly with zero sticky residue, leaving your factory panels untouched.

Q3: How do I clean these door protectors?
Simply wipe with a damp cloth. The non-porous surface repels dirt and stains, no scrubbing needed.

Q4: Will the covers stay attached in hot weather?
Yes, the automotive grade acrylic foam tape is engineered to hold securely from -40 C to 80 C.

Q5: Do they interfere with door storage pockets or window switches?
No, each cover has precision cutouts for door storage pockets, speaker grilles, and window controls.

Q6: Are these real carbon fiber?
No, they feature a carbon fiber textured finish on a rigid ABS hard shell for durability and style.

Q7: What is included in the package?
You receive 2 front door covers, one driver side and one passenger side, with pre-applied tape and an installation guide.
[/MODULE]