[MODULE]
Revised Description:
Protect your Leapmotor door check arms from rust, seizing, and annoying squeaks with these precision-engineered silicone covers. Designed exclusively for 2024-2026 global market EV and EREV models, this low-cost upgrade keeps door mechanisms operating smoothly for years.

Each set includes 4 custom-molded covers that fit all side doors perfectly. The automotive-grade silicone withstands extreme temperatures from -40°C to 200°C, resists UV damage, and blocks water, road salt, and debris. Installation takes less than one minute with no tools required.

The matte black finish with subtle Leapmotor logo blends seamlessly with factory hardware for a clean, upgraded appearance.
[/MODULE]

[MODULE]
Common Concerns:
Car door check arms are exposed metal components that face constant wear. Over time, rain and moisture cause rust to form on the bare surface. Road salt used in winter regions accelerates corrosion and can lead to complete seizing of the door limiter mechanism.

Dirt, sand, and mud accumulate in the door jam area, grinding against moving parts during every open and close cycle. This friction creates squeaks and rattles that worsen with age. The metal-to-metal contact also wears down factory lubrication, leaving doors feeling rough and noisy.

Replacing a corroded door limiter is expensive and requires professional installation. Many drivers simply live with the noise and stiffness, not realizing a simple protective solution exists.
[/MODULE]

[MODULE]
Our Solutions:
Our silicone door check arm covers create a sealed barrier that blocks all moisture, salt, and contaminants from reaching the metal surface. The waterproof design prevents rust formation at the source, eliminating the root cause of door limiter failure.

The soft silicone material cushions metal-to-metal contact, absorbing vibration and eliminating squeaks and rattles. Doors operate smoothly and quietly, restoring the premium feel expected from a modern EV.

Installation requires no tools, no adhesives, and no drilling. Simply clean the surface, align the cover, and snap it into place. The flexible silicone grips tightly and stays secure through daily use, car washes, and extreme weather.
[/MODULE]

[MODULE]
Key Features:
1:1 Custom Fit for Leapmotor  with laser-scanned precision from original factory parts

Automotive-grade silicone that is ROHS compliant, non-toxic, and UV resistant

Waterproof and dustproof barrier that blocks rain, road salt, mud, and car wash debris

Temperature resistant from -40°C to 200°C for all climate conditions

Noise dampening design that eliminates squeaks, creaks, and rattles from door components

Matte black finish with engraved Leapmotor logo for a clean factory look

Compatible with all LHD and RHD global models

Set of 4 covers for all side doors

Tool-free snap-on installation that takes less than one minute

Removable at any time without leaving sticky residue
[/MODULE]

[MODULE]
Product Comparison:
| Features         | Before Use                          | After Use                          |
|------------------|-------------------------------------|------------------------------------|
| Fit              | Universal loose fit, gaps and slippage | Precise 1:1 Leapmotor C10 C16 custom fit |
| Rust Protection  | Bare metal exposed to moisture and salt | Fully sealed waterproof barrier |
| Noise Level      | Squeaks and rattles from metal friction | Silent smooth door operation |
| Durability       | Corrosion leads to seizing and failure | Long lasting protection extends part life |
| Climate Resistance | Cracks in cold, warps in heat | Withstands -40°C to 200°C |
| Installation     | Requires tools and adhesives | Tool-free snap on in under 1 minute |
| Appearance       | Mismatched generic look | OEM matched matte black with logo |
| Material         | Hard plastic or thin rubber | Premium automotive silicone |
[/MODULE]

[MODULE]
Usage Scenarios:
Winter driving in regions that use road salt is the most demanding environment for door limiters. Salt spray accelerates corrosion rapidly, and our covers provide essential protection for drivers in Europe, North America, and high altitude markets.

Coastal areas with salt air and high humidity also pose constant corrosion risks. The waterproof seal keeps moisture out year round, making these covers ideal for drivers near the ocean.

Hot desert climates with intense UV exposure can degrade unprotected rubber parts quickly. Our silicone resists UV damage and maintains flexibility even in extreme Middle Eastern summer heat.

Tropical regions with frequent rain and high humidity benefit from the dustproof and waterproof barrier that keeps mud and moisture away from door mechanisms.

For EV owners who value the quiet premium driving experience, eliminating door squeaks and rattles enhances the overall cabin comfort and vehicle quality feel.
[/MODULE]

[MODULE]
Why Choose Us:
These covers are designed specifically for Leapmotor C10 and C16 models, not generic universal products. Every curve and contour is laser-scanned from original factory parts to guarantee a perfect fit.

The automotive-grade silicone meets EU material safety standards and is ROHS compliant for environmentally conscious buyers. Quality materials ensure long lasting performance without cracking, warping, or fading.

Real world testing across European, Southeast Asian, and Middle Eastern road conditions confirms reliable performance in every climate. We understand the specific challenges drivers face in different regions and engineered accordingly.

Our 24/7 support team is ready to answer any fitment questions for your specific market model. We stand behind our products and are committed to your satisfaction.

The low cost of this protective upgrade saves you from expensive door limiter replacements down the road. A small investment now prevents costly repairs later.
[/MODULE]

[MODULE]
FAQ:
Q1: Will these covers fit my Leapmotor perfectly?
Yes, they are custom designed using laser scanning of original factory parts for a precise 1:1 fit on all Leapmotor models.

Q2: Are the covers compatible with both left-hand drive and right-hand drive versions?
Yes, they fit all global market LHD and RHD models of Leapmotor .

Q3: Do these covers work on both EV and EREV powertrain variants?
Yes, they are compatible with all powertrain options including pure electric and extended range electric versions.

Q4: How do I install the door check arm covers?
Simply wipe the surface clean, align the cover with the limiter shape, and snap it firmly into place. No tools or adhesives are needed.

Q5: Will the covers stay secure during car washes and daily use?
Yes, the flexible silicone grips tightly and remains secured through daily operation, high speed driving, and automatic car washes.

Q6: Are these covers resistant to extreme weather conditions?
Yes, they withstand temperatures from -40°C to 200°C without cracking, warping, or degrading from UV exposure.

Q7: How do I clean the silicone covers?
Wipe them with a damp cloth or rinse with water. They dry quickly and maintain their appearance without fading.

Q8: Can the covers be removed if needed?
Yes, they can be removed at any time without leaving any sticky residue or damage to your vehicle.
[/MODULE]